Bioclimatic Pergola (Rolling Roof)

• The Rolling Roof system offers the folding and gathering feature that no sunroof system in the world can achieve together.
• Panels with a width of 38 cm, which are used as ceiling covering material in the Rolling Roof system, perform the folding movement by rotating around their own axis. After the folding movement is completed, the aluminum panels are collected backwards to obtain a full open ceiling area.
• The wall thickness of the aluminum panels used in the Rolling Roof system is 2mm, the main stream profile wall thickness is 4mm, and the upper rail profile consists of 5mm aluminum material.
• Rolling Roof sunroof system works with water discharge logic. The rainfall on the aluminum panels is transferred to the main stream profile thanks to the stream on the panels and is discharged from the main stream profile to the outside area. It is guaranteed against water intake.
• The Rolling Roof system is installed without the need for carrier steel construction.
• All kinds of interior lighting and heating systems can be adapted to the Rolling Roof sunroof system.
• Rolling Roof sunroof system can be made as a single unit up to 8m. There is no length limitation by making more than one unit for longer dimensions.
• In rainy weather, the panels are designed to be opened a certain amount to refresh the air of the interior space, while preventing water entry into the interior.
• The movements of the Rolling Roof sunroof system are driven by 2 separate motors of 120Nm torque 425W and 300Nm torque 880W. This combination is called 1 set engine. System security is provided with motion sensor switches.
• The Rolling Roof sunroof system works in all kinds of unbalanced environments and can be leveled thanks to the carrier legs.
• The system works with a slope of 5%.
• A single unit can be built up to 50m².
• All profiles and accessories used are stainless.
• The carrier profiles used are 100 * 100 * 4mm and 60 * 120 * 4mm box feet.